For some reason Steinways of the 20's have that arm problem a lot. Years ago I re-veneered both arms of one and a few years later the new veneer cracked also. The plies must be moving in that era. Jim James Grebe Piano-Forte Tuning & Repair Creator of Handsome Hardwood Caster Cups (314) 608-4137 WWW.JamesGrebe.com 1526 Raspberry Lane Arnold, MO 63010 BECOME WHAT YOU BELIEVE! pianoman@accessus.net ----- Original Message ----- From: "J Patrick Draine" <draine@comcast.net> To: "Pianotech" <pianotech@ptg.org> Sent: Tuesday, December 28, 2004 8:43 AM Subject: Re: regluing veneer > Yes, in the vertical plane. I don't have the proper clamps for such a job > so I'll probably go with the CA glue (medium viscosity or thick?). > Thanks for the feedback, > Patrick > On Dec 28, 2004, at 7:03 AM, James Grebe wrote: > >> Is this veneer of the arms? That is a common place for Steinway veneers >> to come loose and crack. >> Jim >> James Grebe > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC