replacing a Bluthner action

Nichols nicho@zianet.com
Wed, 29 Dec 2004 17:04:24 -0700


Bob,
   I've had great fun with the paper clamps (binder type) from Pianotek and 
office supply stores. Just clamp it on, and remove the wire from the 
binder. Instant weight and power change. The cool thing is that it's 
reversible, quick, and cheap...... AND.... you'll find out if the player is 
really thinking "light", or "fast". If it's just too fast, well..... for a 
particular player you can turn some front pins, y'know. The thing is.... if 
you change the action "permanently", you're stuck. The next player may ask 
if you can "speed it up" at the last minute! I'm not suggesting you cheap 
out, on general principles, I'm just saying it's a good idea to make sure 
the target is in focus, and not just a reflection from someone else's eyes.

later,
Guy



At 07:13 PM 12/29/2004 +0100, you wrote:
>Sounds to me like a job for some good ol Stannwood analysis and reworking.
>
>If you are familiar with his measurment methodology, please supply us with 
>the details
>
>Cheers
>RicB
>
>rkd0930@comcast.net wrote:
>
>>I have a friend who runs a small concert center.  He has a 7 foot 
>>Bluthner that none of the visiting performers want to play because they 
>>say the action is like a digital piano (apparently very light for 
>>performers that are used to a Steinway action).  Is it possible to 
>>replace the action with something not as light like perhaps a Renner action?
>>
>>Thanks,
>>Bob Davis
>
>
>_______________________________________________
>pianotech list info: https://www.moypiano.com/resources/#archives
>



This PTG archive page provided courtesy of Moy Piano Service, LLC