i forget. is it always a good idea to check resistance on all action centers and re-pin, if necessary, even if all the parts are brand new? as i've mentioned before, i'm working on a baldwin sd-10. and another thing, this was my second hammer filing ever, and i seem to have taken slightly too much felt off. so i have a slightly uneven hammer line in the bass section. daniel carlton Photos at: https://www.moypiano.com/ptg/files/attachments/96/f3/26/b7/ hammerline1.jpg https://www.moypiano.com/ptg/files/attachments/62/14/53/aa/ hammerline2.jpg https://www.moypiano.com/ptg/files/attachments/ab/cd/9c/f3/ hammerline3.jpg Alternate URL: http://tinyurl.com/279h5 http://tinyurl.com/2lsvm http://tinyurl.com/2l6cv
This PTG archive page provided courtesy of Moy Piano Service, LLC