---------------------- multipart/alternative attachment
In a message dated 1/27/2004 9:35:57 PM Pacific Standard Time,
joegarrett@earthlink.net writes:
Pianolover88 queried: "After a bit of research, and talking with several
techs, I've found that
their time spent hanging new hammers in a vertical piano varies wildly from
tech to tech; ............yada yada."
Reality check for time- Fictious job costs
Time to sell job, pickup action, kibitz with client, drive time 2 hr.
average
Order hammers
10minutes
Remove old hammers
1` minutes
Shape, bore, prep old shanks
2 hr.
Hanging time average
2 hr.
Realign in piano, file bass hammers to mate with unisons 2 hr.
Time spent juicing & needling . Depends on piano 0 to2 hr.
Additional complications coulds arise increasing cost of job
8-10 hours
Cost of hammers Ronsen wholesale
180.oo
Markup
90.00
tax on parts
$370.00
Labor rate times 8-10 fictious labor rate $50.00 per 500.00
870.00
Next job---Regulation how much depends
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/a5/cc/3c/75/attachment.htm
---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC