Ric, Yup! Sure did! jeannie Jeannie Grassi, RPT Associate Editor, Piano Technicians Journal mailto:jcgrassi@earthlink.net -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of Richard Brekne Sent: Friday, January 30, 2004 11:31 AM To: Pianotech Subject: Re: Voicing tool Hi Jeannie You tried metric sized Allen 's as well ? RicB Jeannie Grassi wrote: >List, >My favorite voicing tool is one that I got from Pianotech a few years >ago. It has a threaded collar which, when turned raises and lowers the >needles to whatever length desired. Very handy. However, I can't seem >to find an Allen wrench that works with it....don't know what happened >to the one I had originally...... Pianotek no longer sells this nifty >tool because of lack of availability. They had no recommendation for a >wrench other than my local hardware store. I've tried all available >with no luck. Anyone else using this tool who can tell me the size of >the wrench they use? Thanks much, >jeannie > >Jeannie Grassi, RPT >Associate Editor, Piano Technicians Journal >mailto:jcgrassi@earthlink.net > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives > > > _______________________________________________ pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC