The one thing it does not work is on anything with the plastic or hi=tech plastic. James Grebe Piano-Forte Tuning & Repair Artisan of Wood WWW.JamesGrebe.com 1526 Raspberry Lane Arnold, MO 63010 pianoman@accessus.net ----- Original Message ----- From: "Dean May" <deanmay@pianorebuilders.com> To: "Pianotech" <pianotech@ptg.org> Sent: Tuesday, June 01, 2004 10:26 PM Subject: RE: WD40 > Everybody says not to use it, but I have to admit I have used it a few > times, almost always on junkers. I've never seen any problems. Once I used > it on a troublesome Kimball studio that I tracked for several years. Never > saw any problems on it and it did help the sluggish action. > > Dean > > Dean May cell 812.239.3359 > PianoRebuilders.com 812.235.5272 > Terre Haute IN 47802 > > -----Original Message----- > From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On Behalf > Of Clyde Hollinger > Sent: Tuesday, June 01, 2004 6:45 PM > To: pianotech@ptg.org > Subject: WD40 > > Friends, > > Do any of you use WD-40 in pianos? I've always had the impression they > make the action parts oily, but I know of at least one RPT who uses it a > lot. Anyone want to come to its defense? What's your experience? > > Regards, > Clyde > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC