A very well respected tech in my area puts a very light coat of WD40 on the strings of a freshly strung piano to discourage rust. My recollection is that he puts a little bit on a rag and gently wipes the strings. I find it hard to imagine that such a little bit is going to find its way to the pinblock and cause problems. I don't do it - I just figure its best to simply keep the humidity down. Although I do remember when I was taking the Potter course and just starting to learn tuning, I was out shopping for an old beater piano for practice. I found an old upright a tech (or was it hack?) was selling. We opened it up and when I played it many of the hammers did not return to their resting position. Well, a half-can of WD40 later sprayed liberally in the general direction of the piano action and keys, and all was back in good working order! Even at that stage of my budding career, my gut told me to avoid doing business with this bozo. Terry Farrell ----- Original Message ----- From: "Clyde Hollinger" <cedel@supernet.com> To: <pianotech@ptg.org> Sent: Tuesday, June 01, 2004 7:44 PM Subject: WD40 > Friends, > > Do any of you use WD-40 in pianos? I've always had the impression they > make the action parts oily, but I know of at least one RPT who uses it a > lot. Anyone want to come to its defense? What's your experience? > > Regards, > Clyde > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC