---------------------- multipart/alternative attachment Hi all, One of the stores I work for took delivery of 2 new BB M and Hs yesterday. When I walked into the store they were ready to be unpacked, so I went to work removing all the packing material, removing the action, etc., etc. When I went to put the action back in, something would not allow it to go back into the cavity. I looked for things that might cause it to bind, and the only thing I could figure was that the glides were set so high, it was jamming. I turned all of them in about half a turn, and voila--in it went. When I get time, I'll go back and bed the frame properly, but in the meantime, I have to wonder why the glides were set so high. So it won't "settle in shipment?" Anyone have a possible reason for this? I've removed many actions from new pianos, and have never seen this before. Sorta Mystified, Dave Stahl ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/81/e5/2b/51/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC