hammer flange rail backing

[David Ilvedson]

I'm trying to think where my local automotive paint store is?...;-]

David I.



----- Original message ---------------------------------------->
From: gordon stelter <lclgcnp@yahoo.com>
To: Pianotech <pianotech@ptg.org>
Received: Thu, 10 Jun 2004 11:45:14 -0700 (PDT)
Subject: Re: hammer flange rail backing

>What's wrong with adhesive-backed sandpaper as is
>found in automotive paint stores? Available in many
>grades, in long rolls, and the adhesive is very
>uniformly applied for uniform thickness. The adhesive
>also removes easily with mineral spirits.
>     Thump

> 
>--- Don <pianotuna@accesscomm.ca> wrote:
>> Hi,
>> 
>> Go to your local hardware and ask for "plumbers
>> tape" it is a long roll of
>> emory cloth sandpaper.
>> 
>> At 09:56 PM 09/06/2004 -0700, you wrote:
>> >List,
>> >
>> >I'm about to renew the sandpaper on a grand hammer
>> flange rail.   It is
>> one long piece of 120 or sandpaper.    I can cut
>> sandpaper to fit except in
>> the bass which is longer than a sheet of sandpaper. 
>>  What do others use?
>> >
>> >David I.
>> >
>> >
>> >
>> >
>> >_______________________________________________
>> >pianotech list info:
>> https://www.moypiano.com/resources/#archives
>> >
>> >
>> 
>> Regards,
>> Don Rose, B.Mus., A.M.U.S., A.MUS., R.P.T.
>> 
>> mailto:pianotuna@accesscomm.ca
>> http://us.geocities.com/drpt1948/
>> 
>> 3004 Grant Rd.
>> REGINA, SK
>> S4S 5G7
>> 306-352-3620 or 1-888-29t-uner
>> _______________________________________________
>> pianotech list info:
>https://www.moypiano.com/resources/#archives



>	
>		
>__________________________________
>Do you Yahoo!?
>Friends.  Fun.  Try the all-new Yahoo! Messenger.
>http://messenger.yahoo.com/ 
>_______________________________________________
>pianotech list info: https://www.moypiano.com/resources/#archives