---------------------- multipart/alternative attachment Cliff, I don't understand this. I "thought" we were talking about removing the key slip. Weren't we? :-) Avery At 11:32 AM 6/16/04, you wrote: >Jerry, > >I just did this less than a week ago. It worked beautifully without=20 >affecting anything else. > >1. Remove case parts. >2. Remove keys >3. Loosen keyframe screws (8) >4. Place shims (I used business card slivers) between keyframe and= keyslip. >5. With the shims in place, tighten keyframe screws. >6. Replace keys and case parts. > >Time required: 20 to 30 minutes. > >Cliff Lesher, RPT >Winfield, PA > > > >From: Jerry Cohen <emailforjc@yahoo.com> >Reply-To: Pianotech <pianotech@ptg.org> >Date: Wed, 16 Jun 2004 08:43:46 -0400 >To: "'Pianotech'" <pianotech@ptg.org> >Subject: RE: Petrof keyslip > > >If the keyslip doesn=B9t come off, does anyone have an efficient solution= =20 >when the key fronts are rubbing against the keyslip? > > > >Thanks, > > > >Jerry Cohen > >NJ Chapter > > >----- Original Message ----- >From: david heidel <mailto:dbheidel@comcast.net> >To: Pianotech <mailto:pianotech@ptg.org> >Sent: Tuesday, June 15, 2004 10:47 PM >Subject: Re: Petrof keyslip > >I have a Petrof vertical, and have the same problem. I contacted the=20 >Petrof rep. and was informed that indeed, it does not come off. Don't you= =20 >just love challenges like this? > >David Heidel >----- Original Message ----- >From: Topperpiano@aol.com >To: pianotech@ptg.org >Sent: Tuesday, June 15, 2004 6:43 PM >Subject: Re: Petrof keyslip > >Some of them do not come off. A couple of the Chinese pianos have the=20 >same arrangement. Makes for interesting adjustments when the keys hit the= =20 >keyslip. >Now there's a use for the 9 pound sledge. TP > > ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/d3/d0/fc/1a/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC