<< like web straps that the movers use but with "D" rings sewn into each end. The straps could be only a couple of feet long and since they are 2" wide they would provide plenty of support without digging in. Has anyone tried this before? Are there any other ideas out there for replacement of the ropes? >> I have had good luck with the simple cam anchored nylon tie-downs that you can buy at Wal-Mart. The hooks on the end will go under the plate in the holes, and can be doubled around the struts if you want to put both hooks on the hoist. They are cheap, strong, simple, and adjustable. Regards, Ed Foote RPT http://www.uk-piano.org/edfoote/index.html www.uk-piano.org/edfoote/well_tempered_piano.html
This PTG archive page provided courtesy of Moy Piano Service, LLC