Glassing pinblocks

[David Love]

I've tried that product.  It's an epoxy and I find it too thick for my
liking.   I don't like to have to muscle the block too much to pull it in
to the flange.

David Love
davidlovepianos@earthlink.net


> [Original Message]
> From: Jeannie Grassi <jcgrassi@earthlink.net>
> To: <davidlovepianos@earthlink.net>; Pianotech <pianotech@ptg.org>
> Date: 6/28/2004 10:11:52 PM
> Subject: RE: Glassing pinblocks
>
> Hi David,
> I used a product that Jon Page recommended and it worked really well.
> Marine Tex, a two part paste epoxy.  It comes in different strengths.
> Sold in marine supply places.  I don't have the box here at home, so I'm
> not sure if it is a polyester resin type like what you're looking for.
> If no one else knows, I'll check when I'm in the shop later this week.
>
> jeannie
>
> Jeannie Grassi, RPT
> Associate Editor, Piano Technicians Journal
> mailto:jcgrassi@earthlink.net
>
>
> -----Original Message-----
> From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On
> Behalf Of David Love
> Sent: Monday, June 28, 2004 9:37 PM
> To: Pianotech
> Subject: Glassing pinblocks
>
>
> I'd like to find a polyester resin substitute for the epoxy compound
> that I
> usually use for glassing pinblocks.  Any favorites, or comments about
> different materials for such a purpose?
>
>
> David Love
> davidlovepianos@earthlink.net
>
>
>
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives