stripped pedal bracket holes

John Formsma john@formsmapiano.com
Sat, 15 May 2004 21:58:35 -0500


Joe,

Yeah, I know exactly what you're talking about. My dad had some of those
thingees lying around for years - I've never used them, but I looked at
'em just last week wondering what they were for. Funny....

That would definitely be easier than plug/redrill.

Thanks,

John Formsma

> -----Original Message-----
> From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On
> Behalf Of Joe And Penny Goss
> Sent: Saturday, May 15, 2004 9:49 PM
> To: Pianotech
> Subject: Re: stripped pedal bracket holes
>
>
> Hi John,
> Can not think of the name of the item that you should use,
> but it is sort of
> like a nut attached to a washer with 4 very sharp feet. Use a
> tilter to put
> the piano on its back and drill out the old hole to the size
> that will let
> you use the new fastner and anchor the assembly down with the
> new machine
> screws/bolts.
> Joe Goss
> imatunr@srvinet.com
> www.mothergoosetools.com
> ----- Original Message -----
> From: "John Formsma" <john@formsmapiano.com>
> To: "Pianotech" <pianotech@ptg.org>
> Sent: Saturday, May 15, 2004 8:32 PM
> Subject: stripped pedal bracket holes
>
>
> > List,
> >
> > Baldwin studio with all four pedal bracket screws stripped.
> >
> > I've not had to do this exact repair before, so I have some
> questions.
> >
> > Is the best repair to plug and redrill?
> >
> > If so, it appears that the bottom board will need to be
> removed because
> > I don't see a way to get a drill bit perpendicular to the
> bottom board
> > since the plate is very much in the way. There's only about
> 5-6 inches
> > from the board to the plate. Maybe a right-angle drill?
> (which I don't
> > yet own so don't know the dimensions if there's enough space)
> >
> > Can this be properly repaired without bottom board removal, such as
> > epoxy or a shoe peg? I'm feeling that this would be temporary and am
> > therefore hesitant to spend the time on a temporary repair.
> >
> > What would you do?
> >
> > Thanks,
> >
> > John Formsma
> >
> >
> > _______________________________________________
> > pianotech list info: https://www.moypiano.com/resources/#archives
>
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives
>
>
>



This PTG archive page provided courtesy of Moy Piano Service, LLC