Thanks Bill, Those are the dimensions I was going to go with as well. Rick Ucci/Ucci Piano > Rick, > > Should be plenty. A grand action is typically around 20" deep. My > regulating bench is around 26" deep. Plenty of room to work and some space > for placing tools, etc. I also made mine about 60" wide to accomodate > either a grand or vertical action in a cradle. > > William R. Monroe > Madison, WI > Assoc. > ----- Original Message ----- > From: <richard.ucci@att.net> > To: <pianotech@ptg.org> > Sent: Monday, May 17, 2004 7:36 AM > Subject: workbench > > > > Hi Guys, I'm updating my workshop and need some advise on depth of > workbench for action regulating etc. Is 30" deep enough to accomodate a > grand action and work comfortably? > > > > Rick Ucci/Ucci Piano > > _______________________________________________ > > pianotech list info: https://www.moypiano.com/resources/#archives > > > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC