Sticky Sticker Situation

[Dave Bunch]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
MessageHaven't done it for a while but as I remember- take some twine, =
pull the end stickers up to the rail and then tie them to the rail. =
Unscrew the guide rail from the support brackets, move the rail with the =
stickers intact forward and tie the rail to the hammer rail. Then the =
whole thing will come out as a unit.

Dave Bunch
  ----- Original Message -----=20
  From: Alan=20
  To: Pianotech=20
  Sent: Thursday, May 20, 2004 7:39 PM
  Subject: Sticky Sticker Situation


  Acrosonic, drop action w/wooden stickers that have metal pins on top =
that fit into a bushed guide rail ...=20

  Is there no way to remove the action and replace it without removing =
and individually replacing all 88 stickers? Mein Gott!

  Alan R. Barnard
  Salem, MO



  ---
  Outgoing mail is certified Virus Free.
  Checked by AVG anti-virus system (http://www.grisoft.com).
  Version: 6.0.688 / Virus Database: 449 - Release Date: 5/18/2004



---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/94/d3/97/80/attachment.htm

---------------------- multipart/alternative attachment--