Relocating Knuckles

[Erwinspiano@aol.com]

---------------------- multipart/alternative attachment
In a message dated 5/21/2004 8:47:41 AM Pacific Standard Time, 
rnossaman@cox.net writes:
No, I haven't, but Irwin makes thin kerf blades , including 0.059", 0.063", 
0.070", 0.078", 0.082", 0.086", and 0.094", that should fit your table saw, 
and do what you need with some creative jigging. Go shopping and find out 
what's out there.
Ron N
      Ron 
   The Tokiwa knuckle cores are .078 So the blade will work fine provided 
there is zero wobble. uh huh right.
   Dale

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/d5/39/92/3a/attachment.htm

---------------------- multipart/alternative attachment--