>No, I haven't, but Irwin makes thin kerf blades , including 0.059", 0.063", >0.070", 0.078", 0.082", 0.086", and 0.094", that should fit your table saw, >and do what you need with some creative jigging. Go shopping and find out >what's out there. >Ron N > > Ron > The Tokiwa knuckle cores are .078 So the blade will work fine provided > there is zero wobble. uh huh right. > Dale Maybe you could use an .059 blade and run the shanks twice. PF
This PTG archive page provided courtesy of Moy Piano Service, LLC