Tuner's Knot--NOT!

Piannaman@aol.com Piannaman@aol.com
Thu, 27 May 2004 00:42:03 EDT


---------------------- multipart/alternative attachment
Thanks to everyone for the replies and suggestions.  I think you're right in 
this instance, Keith and Dave P.  I decided to go ahead and order the string.  
The supply houses already have the scale anyway, so it won't take much time 
at all.

Thanks again,

Dave Stahl

In a message dated 5/26/04 2:01:50 PM Pacific Daylight Time, 
kam544@gbronline.com writes:


> 
> At 9:03 AM -0400 5/26/04, Piannaman@aol.com wrote:
> 
> >> ... First note, A0:  kinda tight feeling pin, yank, THUD!  Broken, right 
>> at the pin.  Great opportunity to splice it with the knot I practiced so 
>> diligently for so many hours.
> 
> 
> As you have already discovered, Dave, attempting to splice in that very 
> limited area, with that size bass string core A0 has, and on a M&H grand to boot, 
> is nigh impossible to do without messing up the plate or the felt's 
> appearance.
> 
> 
> As much as I like the challenge of splicing music wire, this would be one of 
> those times where I personally would cry uncle before the fact and order a 
> replacement.
> 
> 
> Sincerely,
> 
> 
> Keith
> 



---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/e6/04/e7/ee/attachment.htm

---------------------- multipart/alternative attachment--

This PTG archive page provided courtesy of Moy Piano Service, LLC