relocating knuckles. --Tooling

[Erwinspiano@aol.com]

---------------------- multipart/alternative attachment
        
  List
  After our posts on this subject I found the parts available to do this. I 
ordered a cobalt double end mill from MSC part no.01714054 at 800-645-7270. 
$20.00 bucks. It has a 3/8" shaft & a .078 cutting ends. I thought the shaft size 
would be a problem but I discovered that a collet is made for a 1/2 router to 
adapt to it. I found this at Nordic specialty tools in Turlock ,Ca .The Part 
no is 65 at 209-634-9015. These folks will make custom router bits
  The guy at MSC also suggested a slotting saw (1&7/8") to run on the router 
& I cringed and said I like my fingers ,no thanks.
   Thanks to David love for his picture of his shank carraige. I'll post back 
the results after I get set up.
  Dale
  


Erwins Pianos Restorations 
4721 Parker Rd.
Modesto, Ca 95357
209-577-8397
Rebuilt Steinway , Mason &Hamlin Sales
www.Erwinspiano.com

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/17/8d/04/c9/attachment.htm

---------------------- multipart/alternative attachment--