fine grit hammer filing; Dremel tool

[JAMES DALLY]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
What is a turkey slicer?
  ----- Original Message -----=20
  From: Carl Meyer=20
  To: Pianotech=20
  Sent: Monday, November 15, 2004 3:30 PM
  Subject: Re: fine grit hammer filing; Dremel tool



  I have the foredom.  Had it for years.  The belt, reversible motor, =
speed control and all.  Haven't used it much.  The problem is that the =
belt slips off when reversing.  That is guaranteed by the design.  A =
belt will slip to the low side of a pulley and ride to the high side =
when turning.  The pulleys need to be crowned.  Even a six inch belt =
sander is crowned in the center of the roller.  I was going to modify =
mine but I now use the turkey slicer.  I've learned how to use that =
effectively.  By handling the body I can favor either side or the strike =
point.  The body needs to be rotated and pushed side to side to clear =
the fuzz or it loads the paper and clogs.  I do use the paddle for =
finishing and more so in the treble.  Works for me.

  Anybody want to buy a foredom hardly used?

  Carl Meyer Ptg assoc
  Santa Clara, Ca.

    ----- Original Message -----=20
    From: Erwinspiano@aol.com=20
    To: pianotech@ptg.org=20
    Sent: Monday, November 15, 2004 10:52 AM
    Subject: Re: fine grit hammer filing; Dremel tool


      Joe
      Good point & a huge feature.!!!
        Dale Erwin:
      Hi Dale,
      The advantage with the Fordom is that the motor can be reversed =
eliminating most gouges?
      Joe Goss RPT
      Mother Goose Tools
      imatunr@srvinet.com
      www.mothergoosetools.com


    Erwins Pianos Restorations=20
    4721 Parker Rd.
    Modesto, Ca 95357
    209-577-8397
    Rebuilt Steinway , Mason &Hamlin Sales
    www.Erwinspiano.com
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/f7/20/8c/75/attachment.htm

---------------------- multipart/alternative attachment--