This is a multipart message in MIME format
---------------------- multipart/alternative attachment
I've never bent a spoon bender. I usually lose them way before=
that. The thin, flat spoon bender will not bend unless your=
tuning with it...;-]
David I.
----- Original message ---------------------------------------->
From: ilex cameron ross <i1ex@earthlink.net>
To: Pianotech <pianotech@ptg.org>
Received: Tue, 19 Oct 2004 16:16:22 -0400
Subject: RE: spoon bender
Actually, I've had the same problem. I ordered mine from Schaff=
for the comb-handle. Not pleased. I guess you get what you pay=
for!
-----Original Message-----
From: pianotech-bounces@ptg.org=
[mailto:pianotech-bounces@ptg.org]On Behalf Of Alpha88x@aol.com
Sent: Tuesday, October 19, 2004 3:02 PM
To: pianotech@ptg.org
Subject: Re: spoon bender
In a message dated 10/18/2004 4:46:17 PM Eastern Daylight Time,=
ilvey@sbcglobal.net writes:
How the heck did you bend a spoon bending tool?
Greetings,
Well... I think that the very first piano I used it=
on, had really hard spoons, which may have initially weakened=
the tool early in it's life.
After that....it sort of got gradually weaker. The=
spoons in 100+ year old pianos seem very hard, for some reason. =
I think the integrity of the tool was further compromised with=
each sucessive old piano with hard spoons that I worked on.
One day, I went to bend spoons, I could feel=
something bending (satisfying feeling to think you're=
adjusting/correcting) but when I removed the tool and checked=
the amount of ...damper lift etc...I noticed no change in=
adjustment.
The bender wasn't doing it's job AT ALL, even=
though I had the thing right at the base of the spoon! Then, I=
puzzlingly, looked at the tool and to my dismay, noticed that IT=
was bent. (Can you just picture this?...whenever I look like=
this, my sister asks, "Did you do another Lucy Ricardo") How=
un-nerving that was. I felt so out of control.
Julia,
Reading, PA
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/0c/c8/84/b0/attachment.htm
---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC