Oops. I also didn't notice the shanks sitting on the rest felts. I guess I don't work too well from pictures. :-) Avery At 01:44 AM 9/1/04, you wrote: >Avery Todd wrote: > >>I guess I'm showing my ignorance but what are you talking about? >> >>Avery > > >The knuckle core seems to be very much t ilted towards the hammer... which >changes the shank ratio from the intended one, in this case increaseing >the leverage of the shank. > >Cheers >RicB > >> >>At 12:23 PM 8/31/04, you wrote: >> >>>Jimminees Chrasmus.... look at those knuckle cores... that HAD to be >>>done willfully... .. or maybe its just the picture is a bit distorted... >>>RicB >>> >>> >>>Barbara Richmond wrote: >>> >>>>Thanks for all your wonderful suggestions, everyone! >>>> >>>>For your pleasure, I found this picture that I took of the action last >>>>spring. As you can see, it has some obvious issues--like, when it was >>>>having trouble, nobody bothered to regulate it! :-) >>>> >>>>Well, I'm off to put some new casters on a church piano. Later! >>>> >>>>Barbara Richmond, RPT >>>> >>>> >>>> >>>>1c7cb4.jpg >>>> >>>> >>>>_______________________________________________ >>>>pianotech list info: >>>>https://www.moypiano.com/resources/#archives >>>> >>> > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC