Baldwin Designs, etc.

[Delwin D Fandrich]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
 


  _____  

From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of
Joe Garrett
Sent: August 19, 2005 7:40 PM
To: pianotech
Subject: Re: Baldwin Designs, etc.


VT said: "I also like the perimeter bolts with the adjustable
plate height feature.  There again, the production
line may not have always done what was intended."
 
This is a total and common misconception. The plate is adjustable, ONLY when ALL
of the plate bolts are not engaged into the rim! Don't think I'd want to try
that while it's under tension!<G>
Joe Garrett, R.P.T.
Captain, Tool Police
Squares R I 

 
Why not? I do it all the time.
 
Del 

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/c3/1f/2b/de/attachment.htm

---------------------- multipart/alternative attachment--