This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Cheek block screw. Marcel Carey, RPT Sherbrooke, QC -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On Behalf Of Joe And Penny Goss Sent: August 22, 2005 10:14 PM To: Pianotech Subject: itenerate robotic unichord pedal Hi Folks, Yamaha grand with electric components <G> Piano is playing fine ((until the disc)) is turned on. The shift is allowing the hammers to travel too far to the right allowing the hammers to hit the neighboring note. Of course nothing is noticed until the dampers are raised. Is this an adjustment of the solenoid or the cheek block screw, or both. Help please. Joe Goss RPT Mother Goose Tools imatunr@srvinet.com www.mothergoosetools.com ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/b2/eb/82/77/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC