itenerate robotic unichord pedal

[Joe And Penny Goss]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
thanks
Joe Goss RPT
Mother Goose Tools
imatunr@srvinet.com
www.mothergoosetools.com
  ----- Original Message -----=20
  From: Dave Smith=20
  To: Pianotech=20
  Sent: Tuesday, August 23, 2005 8:16 AM
  Subject: Re: itenerate robotic unichord pedal


  Joe, The disklavier pedals first need the standard acoustic =
adjustment, then probably disklavier adjustments at the solenoid and a =
recalibration.   Just schedule the next visit when you can reach Yamaha =
service by phone in CA, if you havent done the DKV adjustments and cal =
before.  They can talk you through it.  800-854-1569    2,2.

  Dave Smith SW FL
    ----- Original Message -----=20
    From: Joe And Penny Goss=20
    To: Pianotech=20
    Sent: Monday, August 22, 2005 10:14 PM
    Subject: itenerate robotic unichord pedal


    Hi Folks,
    Yamaha grand with electric components <G>
    Piano is playing fine ((until the disc)) is turned on.=20
    The shift is allowing the hammers to travel too=20
    far to the right allowing the hammers to hit the=20
    neighboring note. Of course nothing is noticed=20
    until the dampers are raised.
    Is this an adjustment of the solenoid or the cheek=20
    block screw, or both.
    Help please.
    Joe Goss RPT
    Mother Goose Tools
    imatunr@srvinet.com
    www.mothergoosetools.com
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/6b/ae/d6/d1/attachment.htm

---------------------- multipart/alternative attachment--