This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Thank you, My next step was going in your direction. Tape may work = just fine. I will learn. Hubert Liverman Opelika,AL=20 Mine is like that also but it's wrapped with bushing strips the way=20 Terry Farrell's is wrapped with tape. I really recommend the felt = strips, your hand won't sweat as with tape and it helps cushion the = blows. Phil Frankenberg CSU Chico, Ca. ----- Original Message -----=20 From: David Ilvedson=20 To: pianotech@ptg.org=20 Sent: Friday, February 04, 2005 7:40 AM Subject: Re: Wrist Support That's what mine looks like except not as carefully done...;-] =20 David Ilvedson -------------------------------------------------------------------------= --- Original message From: Jack Houweling=20 To: pianotech=20 Received: Thu, 3 Feb 2005 22:02:19 -0800 Subject: Re: Wrist Support Here is my version of hand saving, key whacker, banging tool device. = It is two hammers with a notch cut out of each and glued together with = yellow glue. It has last me two years and still holding. Jack Houweling -------------------------------------------------------------------------= --- ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/d8/f1/e8/eb/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC