This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment _____ From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of Mark Potter Sent: Friday, February 18, 2005 5:06 AM To: Pianotech Subject: Re: general finishing question Greg Newell <gnewell@ameritech.net> wrote: When those of you who do, refinish a piano do you remove the filler during the stripping process? Hi Greg - It is not a "goal", per se, for me. Whatever volunteers to come out during the stripping process, as well as the rinsing and scrubbing with maroon scotchbrite or #1 steel wool, is the extent of my endeavors in this regard. I then sand with 150 - 220 and start the finishing process. No brass brushes for me... Mark Potter This is what I do, too. Paul C ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/c2/fe/2b/63/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC