Polishing White Plastic Key-tops

[Marcel Carey]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
I found out that thootpaste works fine. The paste is a little rough, but the
gels are finer.

Marcel Carey, RPT
Sherbrooke, QC
  -----Original Message-----
  From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On
Behalf Of Piannaman@aol.com
  Sent: January 13, 2005 9:45 AM
  To: pianotech@ptg.org
  Subject: Re: Polishing White Plastic Key-tops


  Michael,

  Haven't used Brasso, but I would imagine that it's similar to Flitz, which
works quite well on plastic.

  Dave Stahl

  In a message dated 1/12/05 6:29:17 PM Pacific Standard Time,
alanforsyth@fortune4.fsnet.co.uk writes:
    Brasso.

    AF
      ----- Original Message -----
      From: Michael Gamble
      To: pianotech@ptg.org
      Sent: Wednesday, January 12, 2005 9:01 PM
      Subject: Polishing White Plastic Key-tops


      Hello list
      I don't know if this subject has been covered. A client has this Yam
U1 which suffered a broken key-top. The broken part successfully glued in
place but the whole area needs repolishing.The surface is lightly
scratched - enough to visibly and tactilely make one aware that all is not
what it ought to be. Any ideas on this? Dremel buffing mop? Any special
gunge required?
      Regards from across the Pond
      Michael G (UK)

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/cd/b3/a0/20/attachment.htm

---------------------- multipart/alternative attachment--