Wear a gas mask and back the pins down a bit, first,
if they seem too tight. Also: CA seems to harden more
over time, so tuning within a few days might be
advisable.
Thump
--- David Vanderhoofven <david@vanderpiano.com> wrote:
> Maggie,
>
> I agree with William here. I would be cautious
> about using more than 2 oz
> of CA on a piano, and probably never more than 4 oz
> of CA glue on one
> piano. I had an unfortunate incident a few years
> ago... very old 4'
> something no-name grand, heavily rusted, AND...
> previously treated with
> some unknown pinblock treatment. I used 4 oz of CA
> glue, and since it was
> out of town, wasn't able to get back for a few
> weeks. Fast forward a few
> weeks, and during tuning I found the tuning pin
> torque excessively
> high. The piano was almost untunable because the
> torque was so high. AND,
> a tuning pin snapped off flush with the plate. Joy!
>
> Also, please be very careful sniffing those fumes
> from the CA glue. If you
> have to choose between your health and patching
> together a marginal piano
> using CA glue as a bandaid, consider that you only
> get one set of lungs.
>
> Sincerely,
> David Vanderhoofven
> Joplin, MO
>
> At 08:08 PM 1/26/2005, you wrote:
> > > Personally, I
> > > choose
> > > not to buy CA in anything other than 2oz
> bottles, even for pinblocks.
> > > Rarely have I ever needed more than 2oz to do a
> whole block.
> >
> >
> >Really?!?! I haven't done enough of them to know,
> but the one I am
> >working on took a 2oz bottle in a VERY small
> section. That's why I
> >ordered the 8oz bottle. Probably not the thing I
> will regularly run into,
> >I guess...?
> >
> > > Best,
> > > William R. Monroe
> > >
> >
> >
> >THANKS!
> >-Maggie, WV
>
>
>
> _______________________________________________
> pianotech list info:
> https://www.moypiano.com/resources/#archives
>
__________________________________
Do you Yahoo!?
Yahoo! Mail - now with 250MB free storage. Learn more.
http://info.mail.yahoo.com/mail_250
This PTG archive page provided courtesy of Moy Piano Service, LLC