Papps redesign?

Michael Gamble michael@gambles.fsnet.co.uk
Tue, 5 Jul 2005 11:15:06 +0100


This is a multi-part message in MIME format.

---------------------- multipart/related attachment

------=_NextPart_001_0056_01C58152.CC9E3970
And, Sarah, if it doesn't quite work I've a brain wave for alternative =
use!.... can't remember what it was tho' :-)
Michael G.(UK)
  ----- Original Message -----=20
  From: Sarah Fox=20
  To: Pianotech=20
  Sent: Tuesday, July 05, 2005 5:33 AM
  Subject: Papps redesign?


  Hi all,

  Robin originally wrote,

  >If you look at a Papps wedge closely it would take some fine wood =
working  skills to duplicate one. Maybe one of our expert sound board =
makers could make a few.=20

  ... which was a challenge I couldn't well pass up!  ;-)

  Ladies and gentlemen, I give to you my redesign of the Papps mute, =
designed especially for grand piano usage (doesn't fall over, even on =
the lowest trichords).  It is precision crafted from the finest =
hardwood, engineered to exacting specifications and sturdy enough to be =
handed down through generations to come.



  Its simple, but elegant design enables the skilled artisan to clamp =
the outer two strings of a trichord very quickly and with ease.  The =
felt pieces attached to the side press firmly against the adjacent =
strings, damping against them with the same effectiveness as two rubber =
wedge mutes inserted in the same positions.

  Only $15.  Now taking orders.  Operators standing by!  <grin>

  Seriously, it takes only a minute or two to make one:  Take it apart, =
and weaken the spring a bit.  File/sand down the wood on the inside tip, =
tapering it to a broad point.  With a small triangular file, file a =
notch on each side.  Reassemble.  Glue felt to the sides.

  Of course as effective as this little beauty is, I think it's =
something only an amateur can use, because the professionals have to =
*look*, er...  "professional."  (I wonder if there's some way to dress =
it up so that it doesn't look like a clothes pin (which it is NOT!!).  =
Perhaps a piece of unshrunk heat sink tubing around the tell-tale spring =
area?

  All in fun!  (But it really does work -- quite well, in fact.)

  Peace,
  Sarah

------=_NextPart_001_0056_01C58152.CC9E3970
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/61/f1/9e/59/attachment.htm

------=_NextPart_001_0056_01C58152.CC9E3970--

---------------------- multipart/related attachment
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 29958 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/pianotech.php/attachments/ad/93/87/2c/attachment.jpe

---------------------- multipart/related attachment--



This PTG archive page provided courtesy of Moy Piano Service, LLC