This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Jurgen, I've been told that dehumidifiers use too much current when they start. It's a compressor after all. I would suggest using 2 dehumidifier rods 1-50watts + 1-35watts for the bass AND a bottom cover. I think this would help in a situation like the one you've described. Marcel Carey, Sherbrooke, QC -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On Behalf Of Piano Forte Supply Sent: July 13, 2005 6:02 PM To: pianotech@ptg.org Subject: room climate control I have a client with a 7' Kawai grand in a basement studio. The Relative Humidity is always on the high side (60%). I urged him to monitor the humidity with an electronic hygrometer and to get a dehumidifier. He did this, however the controller on the dehumidifier in very inaccurate. With the controller set at 40%, it cut out when the humidity is still above 60%. The manufacturer told him they are all not precise. He has searched for higher end units, but even the manufacturers of these do not guarantee the precision of their controllers. I would prefer to control the environment in the studio because it "should" be a straight forward thing to do. I feel a Piano Life Saver System will simply always be fighting the higher humidity in the room. I have thought of using a Piano Life Saver humidistat to control a simple room de-humidifier. Would this work? Would he need a relay between the humidistat and the de-humidifier? Any thoughts, and especially experiences, welcome. Jurgen Goering www.pianofortesupply.com ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/02/91/fc/f3/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC