Michael, No! That gets us right back to the same place. The screw stringer is a device that eliminates the ( tuning pin ) and uses a bolt that attaches to the string. the threaded end with nut is used to change pitch. Joe Goss RPT Mother Goose Tools imatunr@srvinet.com www.mothergoosetools.com ----- Original Message ----- From: "Michael Gamble" <michael@gambles.fsnet.co.uk> To: "John Fortiner" <JLFortiner@usadig.com>; <pianotech@ptg.org> Sent: Sunday, July 17, 2005 7:38 AM Subject: Re: Vertical tuning pins on upright > > ----- Original Message ----- > From: "John Fortiner" <JLFortiner@usadig.com> > To: <staytuned@idirect.com>; <pianotech@ptg.org> > Sent: Sunday, July 17, 2005 4:46 AM > Subject: RE: Vertical tuning pins on upright > > > >> And yes - as a rule - they stay very well tuned for a long period of > >> time - > > at least in my experience. > Which gets us neatly round to the theories of pianos going out of tune > because the tuning pins are turning... Yes? > Michael G.(UK) > > John Fortiner > > Billings, MT. > > > > -----Original Message----- > > From: staytuned@idirect.com [mailto:staytuned@idirect.com] > > Sent: Saturday, July 16, 2005 6:58 PM > > To: pianotech@ptg.org > > Subject: Vertical tuning pins on upright > > > > In my early years in this business, I recall facing an upright piano with > > vertical tuning pins on a screw-type mechanism. I remember that it took > > some > > cranking to change the pitch slightly. > > > > As I don't recall the make, does anyone know who the maker could have > > been? > > > > It must have stayed tuned for a long time, for I haven't been called back > > since! > > > > John Lillico, RPT > > Oakville ON > > > > > > > > > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC