Moving from Uprights to Grands P.S.

[Susan Kline]

At 12:39 PM 7/20/2005 -0700, I wrote:
>Also, if you are ever tempted to drive down a loose tuning pin in a grand,
>though that is getting to be an obsolete technique these days, be
>aware that if you don't remove the action and support the bottom
>of the pinblock, you can cause delamination.


You _have_ learned how to remove a grand action without breaking hammer
shanks or dropping keyblocks (on foot, on ivory, on bench?) (I try to
take nothing for granted ...)

Susan