This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Geoff asked: "I can't find that felt punching in the catalog so I don't quite know what = =3D to ask for. So, today's questions are... =3D20 : Is that felt punching the same as a thin balance rail felt punching? = =3D If not, what do I use?" Geoff, If there is enough left of a few, to ascertain the kind of felt and the = original thicknes, you can make your own. Use Arch Punches to punch out = a set in the appropriate felt/thickness. You can get a set of Arch = Punches at Harbor Freight. However, you'd best sharpen them before = using.<G> This can be done on a piece of 120 grit sandpaper, if you = don't have a vertical belt sander. Regards, Joe Garrett, R.P.T. Captain, Tool Police Squares R I ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/bf/38/7a/36/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC