This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hey Joe, I noticed in your post the following quote: "Why not hair pins or paper clips or baling wire..." I have plenty of baling wire-like new, still in a huge roll, never been on a bale of hay! Joy! Elwood =20 Elwood Doss, Jr. Piano Technician/Technical Director Department of Music 145 Fine Arts Building The University of Tennessee at Martin Martin, TN 38238 731/881-1852 FAX: 731/881-7415 HOME: 731/587-5700 _____ =20 From: Michael Gamble [mailto:michael@gambles.fsnet.co.uk]=20 Sent: Friday, July 29, 2005 1:29 PM To: Joe Garrett; pianotech@ptg.org Subject: Re: Strip or Not? =20 Hello Joe and List Indeed I am not "spoiling" for a fight! and I agree the only way to do anything is the right way - however.... you're in the field and you've only got some coat hanger wire to replace a missing hinge pin (which will do the job, albeit temporary) you use the coat hanger wire. No argument. ps - who's talking about "high end" or "low end" anyway? If you have a hard time accepting that I am prepared to fix someone's (a school? perhaps) piano with a temporary hair-pin or coat-hanger wire fix that, I fear, is your problem, Joe, not mine!=20 Regards Michael G. (UK) ----- Original Message -----=20 From: Joe Garrett <mailto:joegarrett@earthlink.net> =20 To: pianotech <mailto:pianotech@ptg.org> =20 Sent: Saturday, July 23, 2005 12:31 AM Subject: Strip or Not? =20 Michael, All this "hoity toity" blowhard stuff about using a temperament strip or just a few mutes is somewhat like the arrogant fallderall that we used to hear from "tuners" when they were railing against ETDs! Same Crap, IMHO! THEN.....sigh....you turn right around and say that you replace hinge pins with coat hanger wire! Yikes! Why not hair pins or paper clips or baling wire or some other "Slock" fix. My question is this: Are you a "high end" Technician or not. As it appears you are not, even though you would like us to believe you are. I chose to believe you are, but I'm having a real hard time accepting it, at this point. You either are or are not. Ya can't have it both ways, IMO. I'm not trying to start a fight here, but your comments will carry some level of credance with some of those who are looking for "Proper" guidance in this industry. The Coat Hanger thingee is, IMO, a last ditch effort or at least a Temporary one and should be presented as such. Regards, Joe Garrett, R.P.T. Captain, Tool Police Squares R I ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/3a/1b/a3/f4/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC