---------------------- multipart/alternative attachment Gordon, I'm working with another tech in rebuilding a similar action from 1890. Ours has not been char-broiled :-). In the first picture you sent, I noticed the hammer rest rail felt very wide. Looking at photo 3, I notice that the rest rail felt is not original, and almost drags on the hammer tails. The felt I removed was only 3/8" wide, and a little taller than what is in photo 3, and does not cover the wippen flanges. It is also very soft, not like the backrail-type material shown. I'm not sure what we're going to use to replace it. Maybe Jurgen will have something up his sleeve. Dave Davis, RPT gordon stelter <lclgcnp@yahoo.com> wrote: Note: forwarded message attached. __________________________________ Discover Yahoo! Stay in touch with email, IM, photo sharing and more. Check it out! http://discover.yahoo.com/stayintouch.htmlTo: gordon stelter <lclgcnp@yahoo.com> From: Britt West <brittsam@charter.net> Subject: Chickering 3 Date: Sat, 28 May 2005 00:59:17 -0400 100_2167.JPG _______________________________________________ pianotech list info: https://www.moypiano.com/resources/#archives ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/f4/ee/18/80/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC