Rib Crowned Soundboards.

Erwinspiano@aol.com Erwinspiano@aol.com
Tue, 21 Jun 2005 10:53:08 EDT


---------------------- multipart/alternative attachment
 
This is true
   Dale

installing the board at 6.5% EMC (as the RC&S guys are doing as  well, as
it turns out at H. Steinway, if they are not misinforming you)  will
result in a very small amount of compression.  I think 6.5 is  equivalent
to about thirty something percent RH which would put the panel  under a
slight amount of compression at DC controlled 42%.   

David Love
davidlovepianos@comcast.net 


 

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/17/6f/f9/ea/attachment.htm

---------------------- multipart/alternative attachment--

This PTG archive page provided courtesy of Moy Piano Service, LLC