Uncommon Tuning Pin Array

[tom driscoll]

> Looks to me like a very regular sequence, just opposite from what most
are.
> There was at least one manufacturer here in the USA that did that on
little
> spinets and such back in the 60s and 70s- Kohler & Campbell maybe (I
forget
> exactly who it was). It always messes you up (grrrrrr!).
>
> Terry Farrell

    I think the old Stark  and  Jansens had this,and if I remember the new
Boston studios also.
    The trick is to not look and not think, just move the lever(notice I did
not say HAMMER!) to the next pin .
    They are frustrating.
    Tom Driscoll