This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Terry, If you are only going to do one set of bushings in leather I suggest = you buy the material from Renner. They sell it in strips and in two = different thicknesses. The quality is very high also. This material is = very expensive to buy by the skin as I do if you are only going to do = one or two sets. Mike Blackstone Valley Piano ----- Original Message -----=20 From: Terry=20 To: pianotech@ptg.org=20 Sent: Tuesday, March 29, 2005 10:05 AM Subject: Leather Key Bushings Anyone have a recommended source for leather key bushing material? I use the Spurlock key bushing sytem with mortise sizing cauls. I've = never done leather key bushings before, but might soon. Any comments or = suggestions/tips? Terry Farrell ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/08/8b/4d/1c/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC