This is a multi-part message in MIME format.
---------------------- multipart/alternative attachment
it surprised me, it is really dry here. Piano was made in 1975. =20
----- Original Message -----=20
From: John Ross=20
To: Pianotech=20
Sent: Saturday, May 21, 2005 7:57 PM
Subject: Re: split bridge
Just wondered.
It does seem odd that it would split, with predrilled holes.
I have just been lucky, I guess.
John M. Ross
Windsor, Nova Scotia, Canada
jrpiano@win.eastlink.ca
----- Original Message -----=20
From: Ron & Lorene Shiflet=20
To: Pianotech=20
Sent: Saturday, May 21, 2005 11:49 PM
Subject: Re: split bridge
yes
----- Original Message -----=20
From: John Ross=20
To: Pianotech=20
Sent: Saturday, May 21, 2005 7:32 PM
Subject: Re: split bridge
Did you predrill the holes for the screws?
John M. Ross
Windsor, Nova Scotia, Canada
jrpiano@win.eastlink.ca
----- Original Message -----=20
From: Ron & Lorene Shiflet=20
To: Piano-Tech=20
Sent: Saturday, May 21, 2005 10:33 PM
Subject: split bridge
List,=20
I got the piano finished. Sounds great. The slowest =
curing epoxy In could get was a 45 minute set. I mixed it well and =
goobed the bridge. As I tried to screw down the bridge top, It kept =
splitting. Too dry out here right now. Then the glue started setting =
up in 20 minutes instead of 45 minutes. We were desperate. The piano =
was on a tilt truck. =20
We ran a pipe clamp from side to side. We stacked 2x4 =
blocks on the bridge to build it up. Then we used a grand piano =
pinblock support to crank pressure from the pipe clamp to the 2x4's and =
the bridge. We did mange to get enough pressure to hold it. It dried =
in place. We never did use screws or dowels. We put the strings back =
and pulled them up. It tunes quite well and the tone is great.
Ron
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/47/15/33/09/attachment.htm
---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC