Stripping tenor section for over ring

[John Fortiner]

I received a call for the same thing a few years ago.  Kent Webb was at
Baldwin at the time.  He sent out a few strips of trichord damper felt which
I installed.  Problem cured.  If you are not bothered by trichord damper
felt installation I'm sure you will find that it will do the trick for you.

John Fortiner
Billings, MT 

-----Original Message-----
From: Sherry [mailto:swidmer@rochester.rr.com] 
Sent: Sunday, September 04, 2005 3:13 PM
To: Pianotech
Subject: Stripping tenor section for over ring

Hi,
    One of my clients has a Baldwin Studio with a terrible over
ring--especially strong coming from the D2 area.  I'm going to try stripping
the tenor section but I'm not sure where to place the stripping on the
strings from a North/South perspective.   I'd appreciate any input.
    Thanks,

    Sherry