Warped Plate on Henry F. Miller

[Greg Newell]

Joe,
         By "rails" I assume you mean action or key frame rails. I have not 
checked that. I'm not sure what you mean by remounting them. I think they 
sit flat on the keyframe.

regards,
Greg



At 01:08 AM 9/19/2005, you wrote:
>Greg Newell said: "Any other thoughts?"
>
>Greg,
>Have you checked the rails, to see if they are, (also), warped? If the 
>"scraping" is only happening in the middle, you do have some wiggle room, 
>if you remount the center action brackets.
>Regards,
>
>Joe Garrett, R.P.T.
>Captain, Tool Police
>Squares R I

Greg Newell
Greg's piano Forté
mailto:gnewell@ameritech.net