Kawai lid screws

[John Ross]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
HTML MessageI found that a sliver of leather, and CA glue worked well. The CA glue, by itself, did not have enough body.
Mind you the holes, were kind of stripped.
John M. Ross
Windsor, Nova Scotia, Canada
jrpiano@win.eastlink.ca
  ----- Original Message ----- 
  From: Joe And Penny Goss 
  To: ilvey@sbcglobal.net ; Pianotech 
  Sent: Friday, September 30, 2005 2:46 PM
  Subject: Re: Kawai lid screws


  Hi David,
  If you have the old screws, a little CA in the holes to firm up and size the hole, may be all you need.
  Joe Goss RPT
  Mother Goose Tools
  imatunr@srvinet.com
  www.mothergoosetools.com
    ----- Original Message ----- 
    From: David Ilvedson 
    To: pianotech@ptg.org ; caut@ptg.org 
    Sent: Friday, September 30, 2005 11:08 AM
    Subject: Kawai lid screws


    List,



    I need to repair/replace all of the screws in the piano hinge of the lids on a Kawai 7 ft. grand.   Does anyone know off hand what size they might be?   I will need a couple of boxes of small brass screws...I haven't seen the piano.



    David I.



---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/8e/ff/34/9d/attachment.htm

---------------------- multipart/alternative attachment--