"Terry Farell wrote" | In this particular case however, a significant part of the problem is likely | related to "All the screws were stripped in the dowel in the rail." Dowels | do not belong in a hammer rail - | | Terry Farrell -------------------------------------------------------------------------------- Terry, A dowel does belong in a hammer rail on a S&S. It is approx. 48" long and lives in a brass tube...last time I looked. I agree with what you meant...just take a longer look at what was said. Bob R.Moffatt & Sons 2323 Lincoln Drive S.W. Calgary, Alberta , Canada T3E 5G4 Phone. 403.243.0385 www.moffattpianos.com Fax. 403.243.6821 email: moffatt5 at telus.net -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060401/f7259301/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC