Terry Is there a huge amount of felt on these hammers as the ones I just saw were ginormous. If so file file file. Also Ari likes using hard maple moldings & I beleive this is where yuour weight is coming from. D.E. I guess I forgot to state that - the 6.9 C88 SW was after tapering. If I taper the sides any more, there won't be enough moulding for a hole for the shank! Dale Erwin--Piano Restorations 4721 Parker Rd. Modesto, Calif 95357 Shop 209-577-8397 cell 209-985-0990 _http://www.Erwinspiano.com_ (http://www.Erwinspiano.com) Specializing in the Restoration, Service & Sales of Steinway, Mason & Hamlin, & other fine pianos -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060405/8cede6a5/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC