Hi Ed, For hairline cracks water thin CA glue is probably a better choice. However, *if* you require epoxy then mix it up--heat it until it runs and heat the area you wish to "suck" the glue into. Dab on the epoxy and let cool. Before it cures wipe up any excess. At 10:21 AM 4/8/2006 -0400, you wrote: >I have yet another novice question. > >Can anyone tell me how you work epoxy into the small eyelash cracks in the >bridges? > >I keep on reading that this is the standard way to make this repair, but no >one ever describes how to actually work the epoxy into such tiny cracks >without makeing a complete mess of the bridge. > >Thanks, Ed > > > > >-- >No virus found in this incoming message. >Checked by AVG Free Edition. >Version: 7.1.385 / Virus Database: 268.4.0/304 - Release Date: 4/7/2006 > > Regards, Don Rose, B.Mus., A.M.U.S., A.MUS., R.P.T. Non calor sed umor est qui nobis incommodat mailto:pianotuna at yahoo.com http://us.geocities.com/drpt1948/ 3004 Grant Rd. REGINA, SK, S4S 5G7 306-539-0716 or 1-888-29t-uner
This PTG archive page provided courtesy of Moy Piano Service, LLC