>Do you see a drawback to that approach? I'd be worried about stressing the flanges and breaking those old parts when guiding a screwdriver down between the whippens to get to the screw heads on the keys. The Bechstein Tool has a handle long enough to reach the rear screw. Adjusting goes rather fast once you get into the 'Zen' of it. I was not able to find it in the Renner catalogue but Jurgen has it: http://www.pianofortesupply.com/offsetinfo.html It is the "must have" tool for rocker arm adjustment. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060412/3a10ff9c/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC