> Absolutely. I routinely add bracing to the straight side, and > particularly to the belly rail (mass too, here). > > /_Meaning a brace coming off the brace closet to the spine. I like this_/ Right, usually under the end of the new cutoff bar, which also braces the rim. > It doesn't do > the slightest thing for crown, but it raises the impedance of > the rim and belly rail so it absorbs less of the soundboard's > energy, improving tone and sustain. > > /_So a heavier wood would be a better choice than say spruce. You bet it would. For the mass, rather than for the strength as most assume. > If I > recall it was Overs who was laminating his belly beams with hard wood. > Cool stuff. Fire up the saw._/ > /__/ > /_ _Dale/ Way cool. Lots of fun! Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC