CA glue on loose hammers

[Avery]

Jon,

Thanks for that information. I've never heard that before.
I've used CA for that repair several times and so far, have not
had a problem. But I think I better get some accelerator. :-)

Avery

At 06:01 PM 4/22/2006, you wrote:
>The CA wicked away from the joint via the grain. Had you given it a shot
>of accelerator first the CA would have remained in the joint.
>
>This method has to be done for reinforcing any joint, grand jack mortices,
>wippen support posts, upright jack support posts.
>
>Accelerator, CA, accelerator.
>
>Apply the accelerator to the opposite side of the joint to where you
>apply the CA, if possible.
>--
>
>Regards,
>
>Jon Page