I've got a brand-new Stanwood circular rule that I used last week! And my bamboo decilog rule is in one of these boxes, right here... Did you put it into the treble cheek block, either between its vertical face and the keyslip, or (gasp!) between its bottom and the keybed? --Cy-- ----- Original Message ----- From: Joe And Penny Goss To: pmc033 at earthlink.net ; Pianotech List Sent: Monday, August 07, 2006 9:37 AM Subject: my loose screw Hi Paul, Do you remember the last time you saw or used a slide rule <g> Sozits piano related, Fixed a twisted key front board/rail the other day with only a little screw. 10 or 15 year old grand with the metal bar supporting the wood: sozit wont warp, right? Dowels that hold it in place were loose in the holes. Tried the screw in several places before I found the best spot. Did not put the screw in the action tray front as that binds the action when the action is shifted. The G 7 through C8 were binding when the cheek blocks were tightened. Now they dont <G> Where did I finally place the screw? Joe Goss RPT Mother Goose Tools imatunr at srvinet.com www.mothergoosetools.com -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060807/9d2ac5f3/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC